Commercial Glass Fabrication
Product Specifications and Technical Details
The following are some available glass types and their specifications to guide your choice for commercial glass fabrication:
- Thickness: From 6mm to 19mm
- Sizes: Custom cut, up to 96” x 130” (2440mm x 3300mm)
- Safety: Heat-treated to be 4–5 times stronger than regular glass; breaks into small, blunt pieces for safety
- Best for: Places where strength and safety are most important
- Standards: Meets ANSI Z97.1 and CPSC 16 CFR 1201 safety requirements
- Thickness: From 6.38mm (two 3mm layers with PVB in between) to 19mm+
- Sizes: Custom made, up to 120” x 84” (3050mm x 2130mm)
- Structure: Two or more glass layers bonded with PVB or SentryGlas interlayer to hold pieces together if broken
- Extra Benefits: Blocks UV rays and reduces noise
- Safety Standards: Meets EN 356 security glass guidelines
- Design: Two or three panes with argon or krypton gas in between for better insulation
- Total Thickness: 20mm to 40mm
- Pane Thickness: Each pane is from 4mm to 12mm, depending on design
- Spacers: Warm-edge spacers to reduce condensation
- Thermal Efficiency: U-values as low as 0.18 BTU/hr-ft²-°F (1.0 W/m²K)
- Sizes: Made to order, up to 96” x 120” (2440mm x 3050mm)
- Coating: Ultra-thin metallic layer applied to the glass
- Thickness: Usually 4mm to 12mm; works well with IGUs
- Benefits: Reflects heat, improves insulation, and blocks UV rays
- Performance: Solar Heat Gain Coefficient (SHGC) from 0.18 to 0.30 depending on coating type
- Thickness: From 5mm to 12mm
- Finishes: Acid-etched, sandblasted, or decorative films for privacy without blocking light
- Sizes: Custom cut up to 96” x 130” (2440mm x 3300mm)
- Durability: Scratch- and wear-resistant finishes
- Cutting Accuracy: Within ±1/16” (±1.5mm)
- Edge Options:
- Polished edges
- Seamed edges (removes sharpness)
- Pencil-polished edges
- Flat polished edges for a sleek look
- Thickness Accuracy: As per ASTM C1036 standards, ±0.5mm depending on glass type
All our commercial glass products meet key international safety and quality standards, including:
- ASTM C1048 – for heat-treated glass
- EN 12150 – for tempered glass
- ANSI Z97.1 – for safety glazing materials
- CPSC 16 CFR 1201 – for tempered safety glass
- NFRC certification (when applicable) – for thermal performance
Fire-resistant ratings are also available for certain laminated or wired glass products upon request.
Why Choose Commercial Glass Fabrication
We work hard and thoughtfully to bring you top-quality commercial glass fabrication products. Every item is made with precision to match exact specifications and deliver quality craftsmanship. We offer a wide variety of glass types and finishes to fit any commercial project, and all our commercial glass fabrication products meet the required safety standards and building codes. Our experienced team is always ready to help you choose the right glass for your design and functional needs. With competitive prices and fast delivery, we make sure you get great value while keeping your commercial glass fabrication project on track.